• EN
  • World market leader
  • Sustainability
  • Solutions
    • Fire protection curtains

      Fire protection curtains

      In case of fire, fire protection curtains close wall and ceiling openings. Their construction (roll-down or folding technique) and the use of different fabrics provide for a wide range of applications as well as different protection goals, classifications and time classes. The casing and guide rails of the highly flexible systems blend almost invisibly into the building and allow plenty of scope for sophisticated architecture and open room concepts.

    • Conveyor system closures

      Conveyor system closures

      Various production and logistics processes call for the most diverse types of conveyor systems. If these conveyor lines pass through fire-retardant or fire-resistant walls or ceilings, the openings required for this purpose must be provided with fire protection closures to prevent the spread of fire through the conveyor system or the goods conveyed. In the event of fire, conveyor system closures (CSC for short) must close these openings immediately and automatically. Fire resistance classified according to DIN EN 13501-2 is just as important as the smooth clearance of the closing areas in the event of a fire.

    • Smoke curtains

      Smoke curtains

      A smoke apron is a part of a smoke control system which also includes other components such as natural smoke and heat exhaust ventilators (EN 12101-2) and mechanical smoke and heat exhaust ventilators (EN 12101-3). Smoke aprons restrict the movement of combustion gases within a building in case of fire.

    • Smoke protection curtains

      Smoke protection curtains

      Once closed, smoke protection curtains (SPC) restrict the passage of smoke during the phase of fire formation, so that in the event of a fire, there is enough time to rescue people and animals from the room behind the curtain and to recover material assets without the need for respiratory equipment.

    • Tube sealings

      Tube sealings

      The solution for issues with fire protection dampers in ventilation and air conditioning systems in conveyor processes. Stöbich offers fire protection for pneumatic conveyor lines the closing elements of which are not exposed to the flow of conveyed material. This way, the closing element cannot be damaged or contaminated by abrasive conveyed goods.

    • Control units

      Control units

      Each automatic fire protection system needs a control unit. They are critical to safety, because a failure of this function means that the entire investment into a fire protection sealing has been in vain. Control units coordinate both fire detection and interaction with other control units, such as higher-level building control systems or clearing of the closing area of conveyor system closures.

  • References
  • Theme worlds
  • News
  • Contact



Product description

A versatile solution with smooth surfaces for high aesthetic standards: The robust slider closure features an encapsulated design. When parked, the slider is positioned inside the casing. the system consists of a load-bearing steel structure lined with Promatect H panels. Walls can be completely replaced by storey-high elements. Universal-B is ideally suited for interrupted and separated conveyor systems, e.g. belt, roller and suspension chain conveyors, sorters and newspaper conveyors.

TypeFire protection closure as part of track-bound conveyor systems
Closing directionfrom left to right | from right to left | From top to bottom | from the bottom to the top
Fire resistanceT 90
Conveyor systemInterrupted conveyor system | Continuous belt conveyor system | Continuous travelling carriages | Sorter | Newspaper conveyor | Continuous suspension chain conveyor | Continuous roller conveyor system | Continuous conveyor system | Sloping track | Round belt conveyor

Structural system design (vertical)

a = 200 (230) | c = 280 (310) | e = 165 | s = 74
Required wall quality
Masonryd ≥ 240 mm
Concreted ≥ 140 mm
Aerated concreted ≥ 200 mm

Technical feasibility
LH200 mm - 2700 mm
LB200 mm - 2500 mm

Structural system design (horizontal)

a = 220 (375) | b = 258 (310) | c = 300 (350) | d = 145 | s = 74 | M = 485
Required wall quality
Masonryd ≥ 240mm
Concreted ≥ 140mm
Aerated concreted ≥ 200mm

Technical feasibility
LH200 mm - 2700 mm
LB200 mm - 2500 mm