• EN
  • World market leader
  • Sustainability
  • Solutions
    • Fire protection curtains

      Fire protection curtains

      In case of fire, fire protection curtains close wall and ceiling openings. Their construction (roll-down or folding technique) and the use of different fabrics provide for a wide range of applications as well as different protection goals, classifications and time classes. The casing and guide rails of the highly flexible systems blend almost invisibly into the building and allow plenty of scope for sophisticated architecture and open room concepts.

    • Conveyor system closures

      Conveyor system closures

      Various production and logistics processes call for the most diverse types of conveyor systems. If these conveyor lines pass through fire-retardant or fire-resistant walls or ceilings, the openings required for this purpose must be provided with fire protection closures to prevent the spread of fire through the conveyor system or the goods conveyed. In the event of fire, conveyor system closures (CSC for short) must close these openings immediately and automatically. Fire resistance classified according to DIN EN 13501-2 is just as important as the smooth clearance of the closing areas in the event of a fire.

    • Smoke curtains

      Smoke curtains

      A smoke apron is a part of a smoke control system which also includes other components such as natural smoke and heat exhaust ventilators (EN 12101-2) and mechanical smoke and heat exhaust ventilators (EN 12101-3). Smoke aprons restrict the movement of combustion gases within a building in case of fire.

    • Smoke protection curtains

      Smoke protection curtains

      Once closed, smoke protection curtains (SPC) restrict the passage of smoke during the phase of fire formation, so that in the event of a fire, there is enough time to rescue people and animals from the room behind the curtain and to recover material assets without the need for respiratory equipment.

    • Tube sealings

      Tube sealings

      The solution for issues with fire protection dampers in ventilation and air conditioning systems in conveyor processes. Stöbich offers fire protection for pneumatic conveyor lines the closing elements of which are not exposed to the flow of conveyed material. This way, the closing element cannot be damaged or contaminated by abrasive conveyed goods.

    • Control units

      Control units

      Each automatic fire protection system needs a control unit. They are critical to safety, because a failure of this function means that the entire investment into a fire protection sealing has been in vain. Control units coordinate both fire detection and interaction with other control units, such as higher-level building control systems or clearing of the closing area of conveyor system closures.

  • References
  • Theme worlds
  • News
  • Contact
Copy Cap

Fire protection for copiers & co

Fire protection for copiers & co.

Copying machines, printers and also drinks vending machines can be found in almost every company. Sometimes they run really hot and can start to burn under certain circumstances. The fire protection experts from STÖBICH and PROTEC-24 know how to prevent the fire from spreading uncontrollably.

Copiers and other devices of comparable size are often easily accessible in corridors that also serve as escape routes. Unfortunately, these electronic everyday helpers pose a great risk of fire: The heating of the fuser unit and a failure of the thermal switch can lead to overheating and consequently to an incipient fire. Once the smoke is in the hallway, it becomes a fire hazard. And even if no one is on site, the toxic fumes cause considerable damage, necessitating renovation and thus interruption of operations.

Intelligent fire protection can consequently save livelihoods. For copiers and similar electronic equipment, STÖBICH and our partner PROTEC-24 have developed the ➥ Copy-Cap developed in different versions: a fire protection bonnet which, after the smoke detector has been triggered, opens within 10 seconds. ➥ slips over the burning device . The smoke development is stopped immediately by the textile system; escape routes remain free and possible building damage is kept within limits.

Thanks to its flat design and individual colouring, the Copy-Cap blends discreetly into the interior design. The metal surface can also be used as a memo board for notes and notices in a central location. After release, the fire protection bonnet can be returned to its original position in no time at all, which also saves costs. Also helpful: PROTEC-24 offers an all-round carefree service for copy caps, from development and installation to maintenance and servicing.