• EN
  • World market leader
  • Sustainability
  • Solutions
    • Fire protection curtains

      Fire protection curtains

      In case of fire, fire protection curtains close wall and ceiling openings. Their construction (roll-down or folding technique) and the use of different fabrics provide for a wide range of applications as well as different protection goals, classifications and time classes. The casing and guide rails of the highly flexible systems blend almost invisibly into the building and allow plenty of scope for sophisticated architecture and open room concepts.

    • Conveyor system closures

      Conveyor system closures

      Various production and logistics processes call for the most diverse types of conveyor systems. If these conveyor lines pass through fire-retardant or fire-resistant walls or ceilings, the openings required for this purpose must be provided with fire protection closures to prevent the spread of fire through the conveyor system or the goods conveyed. In the event of fire, conveyor system closures (CSC for short) must close these openings immediately and automatically. Fire resistance classified according to DIN EN 13501-2 is just as important as the smooth clearance of the closing areas in the event of a fire.

    • Smoke curtains

      Smoke curtains

      A smoke apron is a part of a smoke control system which also includes other components such as natural smoke and heat exhaust ventilators (EN 12101-2) and mechanical smoke and heat exhaust ventilators (EN 12101-3). Smoke aprons restrict the movement of combustion gases within a building in case of fire.

    • Smoke protection curtains

      Smoke protection curtains

      Once closed, smoke protection curtains (SPC) restrict the passage of smoke during the phase of fire formation, so that in the event of a fire, there is enough time to rescue people and animals from the room behind the curtain and to recover material assets without the need for respiratory equipment.

    • Tube sealings

      Tube sealings

      The solution for issues with fire protection dampers in ventilation and air conditioning systems in conveyor processes. Stöbich offers fire protection for pneumatic conveyor lines the closing elements of which are not exposed to the flow of conveyed material. This way, the closing element cannot be damaged or contaminated by abrasive conveyed goods.

    • Control units

      Control units

      Each automatic fire protection system needs a control unit. They are critical to safety, because a failure of this function means that the entire investment into a fire protection sealing has been in vain. Control units coordinate both fire detection and interaction with other control units, such as higher-level building control systems or clearing of the closing area of conveyor system closures.

  • References
  • Theme worlds
  • News
  • Contact

System: StrainBox | Model: S

StrainBox S

Product description

The StrainBox S makes it possible to transport critical and defective lithium-ion batteries in an ADR-compliant manner and to store them safely. Its size and construction were specially designed for the storage and transport of modules and large-format individual cells such as those used in stationary storage or vehicle batteries.

All packaging in the StrainBox series has an integrated filter system that filters out a large proportion of the toxic gases. filtered out to a large extent. Harmful dusts and particles are retained and the escape of solids, liquids and flames is prevented.

Due to the integrated thermal management, there is no critical temperature increase of the outer walls. Should the should the batteries inside accidentally leak, contamination in the vicinity of the packaging is prevented.

For the protection of persons and material goods, the StrainBox S also has the typical safety features that are so only the products of Stöbich Brandschutz GmbH offer. These include the filter system, the mechanically resistant construction and the integrated thermal management.

Main featuresADR-compliant transport of critical and defective lithium-ion batteriesRetention of liquids and solids
Pressure-resistant constructionSecure and stable locking
Integrated gas filter systemNeutralisation of the pollutant gases that occur
Mechanical strength Protection of persons and property
Tested complete systemAbsorption and dissipation of thermal energy
No escape of sparks and flamesNo dusting fillers

Product features

Technical data
StrainBox S
StrainBox S Charge
External dimensions La x Ba x Ha
1.023 x 901 x 609 mm
Inner dimensions La x Ba x Ha
800 x 500 x 380 mm
max. empty weight
215 kg
217 kg
max. payload (transport)
90 kg
88 kg
max. energy content
15,6 kWh
152 l
approved UN dangerous goods packaging with X-coding for transport in accordance with ADR, RID and IMDG Code*

* Transport modes road, rail, inland and maritime shipping; Stöbich is a manufacturer of dangerous goods packaging with a recognised quality assurance programme in accordance with BAM dangerous goods regulations.
StrainBox S

StrainBox S
The Charge variant offers a pressure- and temperature-resistant multiple cable bushing that can be individually assigned for charging and testing purposes.
Description of the components
Gas filter system
Locking system
Lashing eyes for load securing
Gas springs
Cable gland (StrainBox S Charge)
Number plate holder for signage
It is possible to adapt the dimensions to customer requirements after prior consultation.