Product - Smokeshield-C


The curved smoke apron with zero percent leakage

Product description

Closed, curved smoke apron run in a circular or elliptical form or open curved (snake-like) smoke apronFor the time class and temperature class D 60 and/or D 120 (600°C)No residual openings because there are no overlaps, instead there is a closed fabric webIntegrated into the suspended ceilings Connection to the ceiling plan with laser-cut end rail through spring mounted elements As an alternative with direct connection to the lower ceiling (hardly visible, because there is only a 2 mm offset) or in shadow groove designAs standard with 'Gravigen' drive system, i.e. closes without external power source, fire-resistant cables are not necessaryExtreme widths of the smoke apron up to 300 m and drop length up to 4 m (for curve radii > 4 m) The textile web is gathered and stored below the ceiling on an closure moduleClosure module connected across entire smoke protection curtain lengthOptional: integrated lighting fixtures in the closure panel


Textile smoke apron


Modutex 600 A2


- Z - 56. 429 - 916

Closing direction

From top to bottom

Closing cycles


Guide type

without guide rails


D 120 • Classification according to DIN EN 12101-1


Approved hold-open system • To be provided on site


Constructive system design - System drawing

Drop length (AL)

Installation height (EH)

0,1 m - 1.5 m

560 mm

1.5 m - 3.0 m

700 mm

3.0 m - 4.0 m

800 mm



Version with direct attachment (2-3 mm thick) to the suspended ceiling

Casing - Version with direct attachment (2-3 mm thick) to the suspended ceiling

Shadow groove design (10-15 mm groove)

Casing - Shadow groove design (10-15 mm groove)