• EN
  • World market leader
  • Sustainability
  • Solutions
    • Fire protection curtains

      Fire protection curtains

      In case of fire, fire protection curtains close wall and ceiling openings. Their construction (roll-down or folding technique) and the use of different fabrics provide for a wide range of applications as well as different protection goals, classifications and time classes. The casing and guide rails of the highly flexible systems blend almost invisibly into the building and allow plenty of scope for sophisticated architecture and open room concepts.

    • Conveyor system closures

      Conveyor system closures

      Various production and logistics processes call for the most diverse types of conveyor systems. If these conveyor lines pass through fire-retardant or fire-resistant walls or ceilings, the openings required for this purpose must be provided with fire protection closures to prevent the spread of fire through the conveyor system or the goods conveyed. In the event of fire, conveyor system closures (CSC for short) must close these openings immediately and automatically. Fire resistance classified according to DIN EN 13501-2 is just as important as the smooth clearance of the closing areas in the event of a fire.

    • Smoke curtains

      Smoke curtains

      A smoke apron is a part of a smoke control system which also includes other components such as natural smoke and heat exhaust ventilators (EN 12101-2) and mechanical smoke and heat exhaust ventilators (EN 12101-3). Smoke aprons restrict the movement of combustion gases within a building in case of fire.

    • Smoke protection curtains

      Smoke protection curtains

      Once closed, smoke protection curtains (SPC) restrict the passage of smoke during the phase of fire formation, so that in the event of a fire, there is enough time to rescue people and animals from the room behind the curtain and to recover material assets without the need for respiratory equipment.

    • Tube sealings

      Tube sealings

      The solution for issues with fire protection dampers in ventilation and air conditioning systems in conveyor processes. Stöbich offers fire protection for pneumatic conveyor lines the closing elements of which are not exposed to the flow of conveyed material. This way, the closing element cannot be damaged or contaminated by abrasive conveyed goods.

    • Control units

      Control units

      Each automatic fire protection system needs a control unit. They are critical to safety, because a failure of this function means that the entire investment into a fire protection sealing has been in vain. Control units coordinate both fire detection and interaction with other control units, such as higher-level building control systems or clearing of the closing area of conveyor system closures.

  • References
  • Theme worlds
  • News
  • Contact
Product -

Collar

Conveyor system closure as intumescent sealing system

Product description

-Intumescent sealing system

-No clearing of the closing area required if the conveyed material is non-combustible

-No moving sealing elements

Small space requirements on the wall plate

Tested to EI 90 according to DIN EN 1634-1 with conveyed material "fully loaded bottle conveyor"

Manschette

Type

Fire protection closure as part of track-bound conveyor systems

Closing direction

Intumescent swelling on all sides

Fire resistance

EI1 90 • tested according to DIN EN 1634-1

Closing cycles

Not required, because there are no moving parts

Re-opening

not required

Conveyor system

Continuous roller conveyor system • Continuous suspension chain conveyor • Continuous belt conveyor system • Circular conveyor

Downloads

System drawing
Constructive system design - System drawing

a 140


a 140

Technical feasibility

LH

≤ 500 mm

LW

≤ 300 mm

b

provided that

300 mm

LB < 100 mm and LH < 300 mm

500 mm

100 mm < LW < 200 mm
and 300 mm < LH < 500 mm

1000 mm

200 mm < LW < 300 mm
and LH < 320 mm